Skip to content

Software/Firmware Revisions

The following list indicates the latest revisions available for all of our instruments. Please contact the factory before loading a newer version on your instrument to insure compatibility.

ALARM MANAGEMENT
   
-Series 90A/AN-3100D 
Configuration Software: 1.3.1.45
CSM with 1msec SER 7.4.1
CSM with 4msec SER 8.4.2
Communication Board 10.00
Configuration Software 1.3.1.77

   -Series 90B/AN-3200
CSM with 1msec SER: 7.5.1
CSM with 4msec SER 8.5.1
Communication Board 11.03
Configuration Software 1.3.1.77

   -Series 100/AN-6100C
Configuration Software: 1.3.1.77
Firmware Revision 4.1 

   -DMS-3K
Communication Board 06.02
Main Board 4.0.5

FAULT RECORDERS
   
-Breaker Tester
BT-100 software - 1300-530
BT-100 unit - 1.01 firmware

   -DMS-2000 
RTU08
AAU04
DCU13
AOPDCU07
KD485
MBDCU206 

   -Display Station 
DS32 - INSTALL 3.1.57_2A version 3.0.0.569

   -DL8000 
Internal firmware - 2.29 

   -DL-9000 
Internal firmware - 6.07
   
   -Meridian PC Software 
Meridian PC Software - 2.1 (Build 2030) 

   -Meridian Power Quality Analyzer 
Meridian Firmware - 2.0 (Build 2011) 
   
    -Meridian Quatro 
Quatro Firmware - 2.09 

   -TR100 
Internal firmware 2.29
Internal Firmware (current CPU ISA1620) 2.28  

   -TR100+
Internal firmware (ACQ card 1079-262) - 1.14
Internal firmware (ACQ card 1086-745) - 1.33
Internal Firmware - CPU - 1.39

   -TR1600 
TR-1620 Bemoulli - 6.7 (1300-062) firmware
TR-1620 Harddrive- 6.6 (1300-063) firmware
TR-1630 unit - 6.6 (1072-588) firmware
TR-1640 unit - 6.6 firmware
TR-1650 unit- 6.5 (1074-827) firmware
ECIP-20 unit - 6.6 firmware
ECIP-30 unit - 6.6 firmware
TR1625 software - Version 6.73B 

   -TR2000 
Internal firmware - 6.07 
   
   -TR3000
Display Station Software - Install 3.1.57_2A Version 3.0.0.569

METERS
   
-Ci20
Ci20 Meter Firmware - 01.03.07
Ci20 Metrology Firmware - 0.U
Ci20 Flash Loader 2.20
JEMWARE Programming Software - 6.4.1.28 - For use with all JEMSTAR & Ci20 Meters
JEMREAD Data Retrieval Software - 6.1.0.44 - For use with all JEMSTAR & Ci20 meters 

   -JEM 1 
EXJSET - 3.29
EXJ Register Firmware - 2.24.01 Standard Version 

   -JEM 10 
JEMSET2 - 3.22.01
JEM 10 Meter Firmware - 3.25.01 

   -JEMSTAR 
JEMStar Meter Firmware - 03.03.06 - For meters with metrology firmware version 0.P or earlier
JEMStar Meter Firmware - 04.04.06 - For meters with metrology firmware version 0.R or later
JEMStar Metrology Firmware - 0.U
JEMWARE Programming Software - 6.4.1.28 - For use with all JEMSTAR & Ci20 meters
JEMREAD Data Retrieval Software - 6.1.0.44 - For use with all JEMSTAR & Ci20 meters
Ethernet Firmware - 0.07
JEMStar Flash Loader 1.21

   -JEMSTAR II
JEMStar ll Metrology 1.K
JEMStar ll Service 5.5.4
JEMStar ll Register 6.5.4
JEMStar ll Power Quality 9.D
JEMStarll FPGA 4.9.6
JEMWARE ll Configuration Software 2.5.4
JEMREAD Software 6.1.0.56

POWER LINE CARRIER
   -UPLC and UPLC-II (with hardware rev. 13 or lower Transceiver board)
Internal PPC Firmware - 4.06
(SHA-256 Hash Code = c510802e36bd496d70a833b6d42a3b114a476598f566ced911456a008de39f8e)

   -UPLC-II (with hardware rev. 16 or higher Transceiver board)
Internal PPC Firmware - 5.02
(SHA-256 Hash Code = f648d17c2defa320c3bcdb4ba45c182bf2077009215ea6132c3fe2687a0c810c)

POWER QUALITY
PQ&R internal firmware 1.39

POWER TRANSDUCERS & LOADLOGGERS
   -DPMS Transducer 
DPMS Metrology Firmware - 1.8
DPMS Remote Display Firmware - 2.1 

   -DPMS-PM Transducer 
DPMS-PM Metrology Firmware - 1.8
DPMSTalk Programming Software - 2.4 

SEQUENCE OF EVENT RECORDERS
   -ISM 
ISM - ISMComm - 5.40 software for PC.   

   -ALL ISM VERSIONS BELOW ARE FIRMWARE 
ISM - CIU - TSP - 5.3 firmware
ISM - CIU - MCP - 5.7
ISM - TPIOM - 5.2
ISM - Baily - Ver 5.4
ISM - CRT - 5.31
ISM - army ecu - 5.32
ISM - ECU - 5.31
ISM - Fox1A - 5.3
ISM - Fox300 - 5.5
ISM - MIOM card - 5.25
ISM - Parallel card - 5.0
ISM - PRN card - 5.0
ISM - SCM Fiber Optic card - 5.0
ISM Main MCP - 1.2
ISM Secondary (Sub) MCP - 1.11
IPP Pm 5.4
IPP CRT for Ayden CRT - 6.4
IPP CRT for IT802 CRT - 6.2
ISM IPP MST MCP - 1.2S 

   -SERnet
Communication Board 1.06
Main Board 2.6.1

SIGNAL CONDITIONERS
SC-7400 configuration program VER 2.06 WINDOWS 95/98/NT 

BB FOCUS
Internal Firmware 2.05

LEGACY FOCUS MV3
Configuration Software FCS 3.14
Internal Firmware FPH 3.12

LEGACY FOCUS MV4
Configuration Software FCS 3.14
Internal Firmware EPH 4.15.03

LEGACY FOCUS MV5
Configuration Software FCS 3.14
Internal Firmware (T1) FPH 5.15.01
Internal Firmware (E1) EPH 5.15.01